REFRACTORY KOTE (1500°C) – MRO 3008

4,719.00

Avaiability: In Stock
SKU: MRO 3008

‘MRO 3008 – REFRACTORY KOTE (1500°C) is a Off White colored single-part, Monocline Zirconium Oxide coating that produces a hard, oxidation resistant coating on carbon and stainless steel and a range of refractory metals including molybdenum, platinum, rhodium, and titanium to 1500ºC.

  • Ultra Hi-Temp resistance up to 1500°C
  • Can be coated on ceramics, fiber ceramics, graphite and metals
  • Good chemical stability for use in Oxidizing, Reducing & Vacuum Atmospheres
  • Contains high purity, Monocline Zirconium Oxide (ZrO2)

Coating

‘MRO 3008 – REFRACTORY KOTE (1500°C) is a Off White colored single-part, Monocline Zirconium Oxide coating that produces a hard, oxidation resistant coating on carbon and stainless steel and a range of refractory metals including molybdenum, platinum, rhodium, and titanium to 1500ºC. Good for sealing porous refractory and protecting resistance heating elements from oxidation and residue build up that causes arcing and reduced element life.

Applications

Used as protection and interface for graphite and ceramic crucibles, refractory bricks and fiber ceramics as well as for coating kiln furniture, supports and trays.

Benefits

  1. Ultra Hi-Temp resistance up to 1500°C
  2. Can be coated on ceramics, fiber ceramics, graphite and metals
  3. Good chemical stability for use in Oxidizing, Reducing & Vacuum Atmospheres
  4. Contains high purity, Monocline Zirconium Oxide (ZrO2)

Available Packaging

1 kg x 20 No (Minimum batch size)

Caution

For complete safety and handling information, please refer to Material Safety Data Sheets (MSDS) prior to using this product.

Directions of Use

Surface Preparation

Surface to be coated must be structurally sound, dry free from loose material. All surface contamination must be removed. Grease and oil should be grit blasted or water jetted. Deeper penetration must be removed by mechanical means.

 

Mixing

 Product is in dry mix powder form, add liquid component to it approx. 300ml to 1kg MRO 3008 REFRACTORY KOTE. Mix them till homogenous slurry like consistency is achieved and must be free from the lumps. Adjust the water amount to suit your application need. The mixed material should be consumed within 120 minutes.

 

Application Instructions:

Apply by Brush/spray/trowel on the surface to a desired thickness within 120 minutes of mixing.

Apply by Brush/spray/trowel on the surface to a desired thickness within 120 minutes of mixing.

Handling

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

12 months if kept in a dry, air conditioned in the original, unopened containers.

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , , , , , , , , , , , , , ,

Industries

Available Packaging

Packaging Type

Shelf Life

Caution

Max. Operating Temp.

Mix Ratio

Specific Gravity

Color

Temperature

Cure

Percent Solids (By Volume)

Flash Point

Coverage

Downloads

Click to Download TDS:  MRO 3008 – REFRACTORY KOTE(1500°C)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.