S STICK – MRO 8051

For best results, product should be kept and applied at room temperature. ‘MRO 8051 – S Stick’ can be applied when temperatures are between 13°C and 52°C. Spread the Stick over the prepared surface with your hand. Press firmly to ensure maximum surface contact and avoid trapping air. Force the material into any cracks or holes to be filled.

1. ‘MRO 8051 – S Stick’ is lightweight & simple to use, allowing easy transportation to emergency situations and areas with limited access
2. Easy to mix & fast cure for high-speed emergency repairs with minimal disruption in in-situ applications.
3. Excellent adhesion to metals including stainless steel, carbon steel, lead, aluminium, brass and copper as well as many other materials
4. Reduced health and safety risks as it is cold-applied and solvent-free allowing application even in confined spaces
5. The two-colour formulation ensures a uniform mix

114 gm (4 oz) Co-centric  Stick

For complete safety and handling information, please refer to Material Safety Data Sheets (MSDS) prior to using this product.

CURE

Workable for 3-4 mins. Set in 10 mins.

SURFACE PREPARATION

Proper surface preparation is essential for a successful application. The following procedures should be considered:

All surfaces must be dry, clean and rough.

If surface is oily or greasy use ‘MRO 1011 KLEANER DEGREEZER’ to degrease the surface.

Remove all paint by ‘MRO 1017 PAINT REMOVER’.

Remove rust and grime from the surface by abrasive blasting or other mechanical techniques.

Chemical cleaning with ‘MRO 1011 KLEANER DEGREEZER’ should follow all abrasive preparation. This will help to remove all traces of sandblasting, grit, oil, grease, dust or other foreign substances

Always try to make the repair as soon as possible after cleaning the substrate, to avoid oxidation or flash rusting.

MIXING

Cut out the required amount with a knife and knead with fingers or briskly roll between palms to a uniform color.

Apply to the surface to be repaired within 3 minutes of mixing.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. The safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety and short and long-term exposure, refer to this product’s safety data sheet (SDS).

A shelf life of 2 years from date of manufacture can be expected when stored at room temperature (22ºC) in their original foil pouch.

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet are accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. The user is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data is offered without warranty.