123 DL – MRO 1009

Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation.

Improving the running-in process and for lubrication under high vacuum and at extreme temperatures.

For metal/metal combinations with slow to medium fast movements and high loads.

Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel.

Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel.

1. Air drying
2.  Avoidance of stick-slip and fretting corrosion
3. High aging resistance
4. Provides clean dry film lubrication and does not accumulate dirt or abrasives
5. Low coefficient of friction; high surface load and pressure withstanding capacity
6. Protects surfaces from wear, galling and seizure
7. Oils, grease and solvent resistant
8. Offers surface protection from corrosion
9. Lubricates under adverse operating environments such as in vacuum or near radiation
10. Provides maintenance free permanent lubrication where oil or grease contamination cannot be tolerated
11. Excellent lubricity and highly abrasion resistant

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

First clean and degrease the surface which will be coated with MRO 1009 – 123 DL. Phosphatization or sandblasting (180 grit) increases the adhesion and service life. Stir MRO 1009 – 123 DL thoroughly before applying by spraying or brushing. Recommended dry film thickness: 5 to 20µm.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.