ELECTRONIC COMPONENT KLEANER – MRO 1005

898.00

Avaiability: In Stock
SKU: MRO 1005

‘MRO 1005 – Electronic Component Kleaner’ is a high purity cleaner designed to clean electrical connections and contacts and improve performance and prevent failures.

  • Fast penetrating and rapidly evaporating high purity cleaner suitable for ‘off-line’ cleaning applications
  • Low surface tension and superior wetting abilities ensure effective cleaning
  • Cleans equipment fast and leaves no residue or oily films
  • Quickly dislodges oil, grease, silicones, fingerprints, carbon, oxides and other light contaminants from precision electrical / electronic equipment
  • Extends wear life of the equipment and reliability of performance
  • High dielectric strength
  • Prevents intermittent failure of equipment due to arcing, tracking, short circuits and corona discharges
  • Safe on most plastics, metals, rubbers, insulation materials
  • Contains safe non flammable CO2 propellant
  • 360° Valve allows product to be sprayed in any position – even inverted

Cleaner

‘MRO 1005 - Electronic Component Kleaner’ is a high purity cleaner designed to clean electrical connections and contacts and improve performance and prevent failures. It rapidly penetrates electrical, electronic and metal parts to quickly clean and remove grease, oil, carbon, moisture, dirt, dust, oxides and other light contaminants to quickly restore and regenerate heavily used and soiled contacts. ‘MRO 1005 - Electronic Component Kleaner’ is a highly effective cleaner that does not contain any CFC’s, HCFC’s, chlorinated solvents or any ozone depleting chemicals and is safe for use on most plastics, rubbers, metals and other elastomeric materials.

Applications

Electronic equipment
Contacts, controls, relays, switches, connectors, terminals
Circuit breakers
Capacitors
PCB
Ignition systems
Sensors
Plugs & sockets
Fuse boxes
Transformers
Tuners
Potentiometers
Solenoids
Communication equipment
Aviation equipment

Benefits

  1. Fast penetrating and rapidly evaporating high purity cleaner suitable for ‘off-line’ cleaning applications
  2. Low surface tension and superior wetting abilities ensure effective cleaning
  3. Cleans equipment fast and leaves no residue or oily films
  4. Quickly dislodges oil, grease, silicones, fingerprints, carbon, oxides and other light contaminants from precision electrical / electronic equipment
  5. Extends wear life of the equipment and reliability of performance
  6. High dielectric strength
  7. Prevents intermittent failure of equipment due to arcing, tracking, short circuits and corona discharges
  8. Safe on most plastics, metals, rubbers, insulation materials
  9. Contains safe non flammable CO2 propellant
  10. 360° Valve allows product to be sprayed in any position – even inverted

Available Packaging

500 ml Aerosol Can

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Directions of Use

Turn off power before spraying. Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Dry off the solvents from the electrical components completely before applying current.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

24 months from date of manufacture

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , , , , , ,

Industries

Available Packaging

Packaging Type

Shelf Life

Caution

Type_

Appearance

Color

Odour

Specific Gravity

Flash Point

Boiling Point (initial)

Vapour Density

Percent Volatile

Evaporation Rate

Dielectric Strength

,

Kauri Butanol Value (KB)

Surface Tension

Propellant

Downloads

Click to Download TDS: MRO 1005 – Electronic Component Kleaner

Click to Download MSDS:

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.