ASSEMBLY GEL – MRO 7000

4,242.00

Avaiability: In Stock
SKU: MRO 7000

Solid lubricant paste for the assembly and running-in of metal components.

  • Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
  • Low coefficient of friction
  • High pressure withstanding capacity
  • Load bearing capacity exceeds the yield point of most metals
  • Offers protection from wear and friction
  • Eliminates metal-to-metal contact
  • Prevents seizure, scoring, galling, fretting corrosion and stick slip
  • Makes disassembly easier and non-destructive irrespective of operational period or conditions
  • Economical to use owing to its high surface coverage capacity
  • Aids running in and provides emergency lubrication during start ups
  • Prevents cold welding and stick slip

Paste

Solid lubricant paste for the assembly and running-in of metal components.

Applications

Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gear-boxes.

Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting.

Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.

As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.

As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.

Benefits

  1. Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
  2. Low coefficient of friction
  3. High pressure withstanding capacity
  4. Load bearing capacity exceeds the yield point of most metals
  5. Offers protection from wear and friction
  6. Eliminates metal-to-metal contact
  7. Prevents seizure, scoring, galling, fretting corrosion and stick slip
  8. Makes disassembly easier and non-destructive irrespective of operational period or conditions
  9. Economical to use owing to its high surface coverage capacity
  10. Aids running in and provides emergency lubrication during start ups
  11. Prevents cold welding and stick slip

Available Packaging

1 Kg container

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Directions of Use

Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

60 months from date of manufacture in sealed condition

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , ,

Industries

Available Packaging

Packaging Type

Shelf Life

Caution

Type_

Appearance

Color

Coverage

Penetration Properties

NLGI Class

Density

Drop point

Coefficient of friction

Four ball test

,

Copper strip corrosion test

Downloads

Click to Download TDS: MRO 7000- Assembly Gel

Click to Download MSDS: MSDS MRO 7000 – ASSEMBLY GEL

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.