Cu ANTISIEZE GEL – MRO 7001

Used for bolted joints that will be subjected to high temperature and corrosive effects :

Cylinder head bolts
Nozzle head screws
Tension rings of centrifuges

1. Extremely wide service temperature range of -30°C to +1100°C
2. Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments
3. High load withstanding capacity
4. Creates an effective matrix between mating surfaces to prevent metal-to-metal contact
5. Protects surface from wear and friction
6. Good corrosion protection
7. Water-resistant
8. Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension
9. Prevents bolt breaking, sintering, fusion, seizure, thread striping, and distortion of threads
10. Meets requirements of MIL-A-907E

1 Kg container

NA

Clean and degrease the surface with a wire brush to remove all previous residues or any micro rust prior to application. Apply this paste with a wire brush in adequate quantity on the surface and right down to the base stem of the thread. The excess paste need not be removed as it provides a good sealing effect. Do not mix with other oils or greases.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. The safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety and short and long-term exposure, refer to this product’s safety data sheet (SDS).

60 months from date of manufacture in sealed condition

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet are accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. The user is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data is offered without warranty.