ROLLER BEARING GEL – MRO 7004

Used successfully on roller bearings, plain bearings, sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded spindles.

For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.

For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

1. Extremely wide service temperature range of -30°C to +130°C (up to +150°C for short intervals)
2. Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
3. Prevents metal-to-metal contact, reduces friction and wear & protects against fretting corrosion
4. Highly resistant to hot or cold water and water washout
5. Extends re-lubrication intervals and cuts down lubricant consumption
6. Combination of EP additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
7. Offers good surface protection and corrosion inhibiting properties
8. Very good performance under moderate to high loads and medium speeds under reciprocating motions
9. Makes sliding smoother and reduces operational noise
10. Increases wear life of the equipment & out performs conventional lubricants

1 Kg container

NA

Use as supplied. Never dilute or mix with other oil or grease. Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralized lubrication systems.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

36 months from date of manufacture in sealed condition

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.