ROADMARC – MRO 4020

7,726.00

Avaiability: In Stock
SKU: MRO 4020

‘MRO 4020 – ROADMARC’ is a pure acrylic resin based roadmarking paint that is specially formulated with high quality weather durable pigments.

  • Very tough and abrasion resistant.
  • Excellent weather durability.
  • Lead & Chrome free, low VOC(<100g/l)
  • and environment friendly.
  • Fast drying.
  • Easier, safer cleanup using water and mild solvents or
  • Suitable for use on bituminous and concrete surfaces.

Coating

‘MRO 4020 – ROADMARC’ is a pure acrylic resin based roadmarking paint that is specially formulated with high quality weather durable pigments.

Applications

As a road marking paint to draw parking bay lines, arrows, numbers, lines etc.

Curbstone

Traffic Crossings

Service Stations

Warehouses

Floor Coatings

Garages

Benefits

  1. Very tough and abrasion resistant.
  2. Excellent weather durability.
  3. Lead & Chrome free, low VOC(<100g/l)
  4. and environment friendly.
  5. Fast drying.
  6. Easier, safer cleanup using water and mild solvents or
  7. Suitable for use on bituminous and concrete surfaces.

Available Packaging

5 Kg Container

Caution

NA

Directions of Use

SURFACE PREPARATION

The service life span and the service performance of this product are directly related to the degree of surface preparation.

The surface to be over coated must be dry and free from debris before commencement of coating.

Dry brushing should be done to remove dirt and dust. A fresh water wash is recommended.

New concrete should be left for at least 21 days to cure before coating.

The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.

Contaminated concrete surfaces are best cleaned by brushing with an active cleaner like ‘MRO 2006 – Non Chlorinated Kleaner’.

Moisture penetration from below (ground water) will impair proper.

APPLICATION

Roller or Brush : These are the recommended methods of application.

Stir contents of the can thoroughly before use. Thinning is not required.

Sprinkle the glass beads by manually over the coating before drying the coating.

Remove lining tape directly after having applied paint.

Apply only when the air and surface temperatures are between 10-38°C and the surface temperature is at least 3°C above the dew.

The relative humidity should not be greater than 85%.

Extremely high or low relative humidity can effect dry times and the final gloss of the coating.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

NA

Shelf Life

18 months if kept in a dry condition at temperatures between 5°C and 30°C in the original unopened containers. If stored at high temperatures the shelf life may be reduced.

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , ,

Industries

Available Packaging

Packaging Type

Shelf Life

Caution

Coverage

Appearance

Pot Life

Abrasion Resistance

Hardness

Color

, ,

Specific Gravity

Application Temperature

Functional Cure

Adhesive Shear Strength

Chemical Resistance

Solids by Volume

Drying Time

Downloads

Click to Download TDS:  MRO 4020 – Roadmarc

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.