BUSBAR KOTE LT – MRO 1027

Protects electrical connections on wire, cables, alarms, electronics

Sub Stations

Switchgear panels support structure guards against animal caused flashovers

Bus-bars

Transmission Towers

1. Provides excellent resistance from acids, alkaline and abrasion
2. Seals out moisture and salt
3. Possesses high dielectric strength, surface and volume resistivity to provide effective insulation of electrical equipment
4. Hard, durable & flexible protective film does not peel, crack or age and offers protective resistance to shocks, abrasion as well as aggressive chemical environments
5. Fast air-drying, stable, single component coating with excellent resistance against oils, chemicals, ageing, moisture condensation, weathering effects
6. Seals out moisture with a visible, highly glossy, smooth abrasion resistant protective coating
7. Highly heat resistant coating suitable for 180 Degree C insulation with greater allowance for thermal expansion and contraction
8. Prevents tracking, corona discharges, flashovers and electrical failures caused by water seepage
9. Very good adhesion on a variety of substrates
10. Can be used to insulate any intricate shape like nut, bolts, threads etc
11. Dielectric strength 2200 V/mil

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Shake can well before use. Clean thoroughly and dry the surface to be coated before application of this coating. Mask area not to be sprayed. Spray from 12-15 inches away in light, even coats with a sweeping action of the hand. Allow solvents to evaporate completely before re-application. Additional coats for heavy film can be applied when first coat is dry. Coating becomes dry to touch in about 20-30 minutes.

Clean the valve by inverting the can and spraying a few short bursts till only the clear propellant comes out. Clean the actuator button orifice by means of a thin, fine wire.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture.

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.