Avaiability: In Stock
SKU: MRO 1008

‘MRO 1007 -DRIVE BELT DREZING’ is specifically formulated high quality belt dressing that is designed to eliminate squeaks, aid in power transfer and increase belt life

  • Increase pulling power of belt
  • Protects belt from deterioration due to oxidation and heat
  • Remains soft, does not harden or glaze
  • Easy application, aerosol spray for maximum coverage, extension tube for hard to reach areas
  • VOC compliant
  • Can be used in wet outdoor conditions


‘MRO 1008 – CHAIN LUBE’ is a fully synthetic adhesive lubricant for the lubrication of fast-running chains and machine elements indoors and outdoors that are subjected to high loads or corrosive influences.


Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device

Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges  or sliding surfaces

Roller chains such as motorcycle and bicycle chains

Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways

Stacker truck chains as well as single or multiple flat link articulated chains without a re-lubrication device


  1. High load carrying and extreme pressure properties
  2. Special friction reducing additives reduce wear
  3. Highly effective due to outstanding creep and gap penetration properties
  4. Highly adhesive with very good vertical cling properties and does not get thrown off or drip off
  5. Excellent wear protection
  6. Very good resistance to cold and hot water as well as to saline solutions
  7. Excellent corrosion protection
  8. Very good oxidation resistance
  9. O-ring neutral

Available Packaging

500 ml Aerosol Can


Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Directions of Use

For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with MRO 1011- Kleaner Degreezer universal cleaner.

Spray on evenly ‘MRO 1008 – CHAIN LUBE’. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. In as far as available, observe the machine manufacturer’s instructions. Assess the lubrication frequency and quantity on basis of service conditions, avoid excessive lubrication. Caution: Only mix with suitable lubricants.


Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.


Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

24 months from date of manufacture


All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information



, , , , , , , , ,


Available Packaging

Packaging Type

Shelf Life







Flash Point

Pour point


Copper strip corrosion test

Lower Operating temperature

Upper Operating temperature

Four ball test


Resistant to



Click to Download TDS: MRO 1008 – Chain Lube

Click to Download MSDS: MSDS MRO 1008 – CHAIN LUBE


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.