KORROSION INHIBITOR – MRO 1012

‘MRO 1012 – KORROSION INHIBITOR’ can be used for applications involving protection of metal surfaces in storage, service or shipment for providing long term, heavy-duty corrosion protection as: cranks, engine assemblies, bearings, gears, valves, spindles, chains & hoists, wire ropes, steel cables, dies & moulds, lathes, mechanical instruments, precision components, parts in shipment, auto ancillaries.

1. Firm waxy film completely seals out moisture
2. Prevents formation of rust & corrosion
3. Heavy duty corrosion inhibiting film assures complete rust protection
4. Highly resistant to humidity & salt spray
5. Provides long term corrosion protection for up to 2 years outdoors
6. Removal of the film is very easy with any industrial solvent based degreaser

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Shake can well before use. Spray onto clean, dry and degreased surfaces. Ensure removal of rust, loose scales, dirt, dust and trapped moisture from surfaces before application. Mask areas not required to be coated. Spray uniformly a light film for maximum coverage. Two light films are better than a single thick film. For thicker films, recoat only after previous coat dries. Reuse as required.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.