SS KOTE – MRO 1015

1,864.00

Avaiability: In Stock
SKU: MRO 1015

‘MRO 1015 – SS KOTE’ is a high performance coating designed to provide protection to stainless steel.

  • ‘MRO 1015 – SS KOTE’ is a specially designed coating containing stainless steel pigment to provide maximum corrosion resistance and protection against weather, sunlight, oil and water
  • Provides a long lasting durable film of 100% pure SS 316L pigments
  • Excellent outdoor durability
  • Fast air drying and adheres well to surfaces
  • Single component coating with a satin sheen finish and luster look of stainless steel
  • Offers long lasting corrosion protection
  • Does not contain any lead

Stainless Steel Spray

‘MRO 1015 - SS KOTE’ is a high performance coating designed to provide protection to stainless steel. It air dries fast on application to leave a coating with stainless steel 316L pigments. It is a single component ready to use protective film. ‘MRO 1015 - SS KOTE’ does not contain any chlorinated solvents, CFCs or ozone depleting chemicals

Applications

Effective for industrial, mining, construction equipment piping, storage tanks, structural steels, welding seams on stainless steel

Benefits

  1. ‘MRO 1015 – SS KOTE’ is a specially designed coating containing stainless steel pigment to provide maximum corrosion resistance and protection against weather, sunlight, oil and water
  2. Provides a long lasting durable film of 100% pure SS 316L pigments
  3. Excellent outdoor durability
  4. Fast air drying and adheres well to surfaces
  5. Single component coating with a satin sheen finish and luster look of stainless steel
  6. Offers long lasting corrosion protection
  7. Does not contain any lead

Available Packaging

500 ml Aerosol Can

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Directions of Use

Clean and degrease the surface prior to application. Remove all rust and loose scales by wire brush. Shake can well for a couple of minutes till bearing noise from inside the can is audible. Repeat the same before every application. Spray light, even coats with sweeping action of the hand onto completely dry surface. Allow solvents to completely evaporate before re-application. Drying time to touch is about 10-15 minutes, to handle is about one hour and for complete cure is about 24 hours. Flush away paint products or product residues in the dip tube of the valve by cleaning it. Cleaning of the valve should be performed after spraying is finished, by inverting the can and pressing the actuator button in short bursts till only the propellant comes out. If required, to prevent clogging, remove the actuator button and clean the button orifice with a thin, fine wire.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

24 months from date of manufacture

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , ,

Industries

, , ,

Available Packaging

Packaging Type

Shelf Life

Caution

Type_

Appearance

Color

Odour

Specific Gravity

Flash Point

Pigment

Drying Time -To Touch

Drying Time -To Handle

Complete Cure

Coverage

Downloads

Click to Download TDS:  MRO 1015- SS Kote

Click to Download MSDS:  MSDS MRO 1015 – SS KOTE

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.