KLEANER DEGREEZER – MRO 1011

903.00

Avaiability: In Stock
SKU: MRO 1011

‘MRO  1011 –  KLEANER  DEGREEZER’ is a non chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as an alternative for chlorinated solvents like CTC, 1,1,1  Trichloroethane.

  • Removes grease, oil, dirt, dust, sludge
  • Non corrosive, non conductive & non staining
  • Removes tar, adhesives and other tough contaminants
  • Leaves no residue
  • Safe on metals, most plastics, glass and ceramics
  • Non chlorinated formulation
  • Fast penetrating and superior wetting action
  • 360° valve allows spraying in any position-even inverted

Metal Surfaces Cleaner / Degreaser

‘MRO 1011 - KLEANER DEGREEZER’ is a non chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as an alternative for chlorinated solvents like CTC, 1,1,1 Trichloroethane. Safety standards from both, worker health as well as environmental, prohibit the use of chlorinated solvents like CTC or 1,1 ,1 TCE. ‘MRO 1011 - KLEANER DEGREEZER’ rapidly penetrates through grease, oil, dirt, dust and other contaminants and cleans equipment fast. It has a pleasant citrus odour, fast evaporation rate and does not leave any residue. ‘MRO 1011- KLEANER DEGREEZER’ cleans metal surfaces effectively due its superior penetrating and wetting ability. It does not contain any CFC’s, chlorinated solvents or ozone depleting chemicals and is suitable for cleaning / degreasing of all metal surfaces and equipment only.

Applications

For heavy duty cleaning / degreasing applications of all mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, moulds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools. Safe for use on all metal surfaces, glass, most plastics and ceramics.

Benefits

  1. Removes grease, oil, dirt, dust, sludge
  2. Non corrosive, non conductive & non staining
  3. Removes tar, adhesives and other tough contaminants
  4. Leaves no residue
  5. Safe on metals, most plastics, glass and ceramics
  6. Non chlorinated formulation
  7. Fast penetrating and superior wetting action
  8. 360° valve allows spraying in any position-even inverted

Available Packaging

500 ml Aerosol Can

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Directions of Use

Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying.  Use only when completely dry. Test on plastics prior to use for compatibility.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

24 months from date of manufacture

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , , , ,

Industries

,

Available Packaging

Packaging Type

Shelf Life

Caution

Type_

Appearance

Color

Odour

Specific Gravity

Flash Point

Solubility

Percent Volatile

Evaporation Rate

PH

Metal / Plastics Safety

Safety Norms

Propellant

Downloads

Click to Download TDS: MRO 1011- Kleaner Degreezer

Click to Download MSDS: MSDS MRO 1011 – KLEANER DEGREEZER

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.