BIO-DEGRADABLE KLEANER – MRO 2000

Suitable for mechanical components washing and degreasing applications to remove ink, oil, mildew, tar, soot, wax, carbon and grease from:

Bearings

Carpets

Castings

Concrete floors. 

Engines

Machinery

Motors

Tanks

Valves

Windows

1. Economical, can be diluted with water
2. Can be used heated or at room temperature
3. Non-toxic and non-flammable cleaning product
4. Does not contain ozone-depleting chemicals or compounds (OCDs)

5 L container

NA

Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned.

Start at higher concentrations of ‘MRO 2000 – BIO-DEGRADABLE KLEANER’ in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.

Dilute the product by adding water to it.

Stir mechanically with a stirrer if required.

Apply product by brush, swab or by dipping components into the cleaner solution.

Allow time to penetrate contaminants and then rinse off with water.

For heavily soiled parts, use a wire brush or an abrasive to remove excesses.

Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface.

Test for compatibility on soft metals and plastic surfaces by checking on a small area.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

18 months from date of manufacture in sealed condition

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.