OFFLINE KLEANER – MRO 1002

Ideal for applications where lower flash-point solvents may
be used :

Alarm and signal systems
Circuit breakers
Connectors
Contacts
Electromechanical assemblies
Generators
Laboratory and test equipment
Motor controls
Plugs and sockets
Printed circuit boards
Relays
Sensors
Switches
Terminals

1. Periodic planned application of ‘MRO 1002 – OFFLINE KLEANER’ prolongs the life expectancy of components.
2. Convenient 360° (upside-down) spray valve for aerosols.
3. High purity CO2 propellant, giving more active product content.
4. Non-conductive and non-corrosive.
5. Safe for all metal surfaces, most rubbers, plastics and coatings.Test on sensitive plastics, adhesive-mounted or stressed parts.
6. Evaporates completely, leaving no residue.
7. Fast cleaning action for removal of flux traces, light oils, finger prints and other contaminants ‘off-line’.

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Spray liberally on surface to be cleaned and allow to run off. Spray starting at the top of the surface and slowly working towards the bottom. Use extension tube for pinpoint cleaning.

To remove oxide and carbon deposits, use an abrasive and rinse off intermittently with ‘MRO 1002 – Offline Contact Kleaner’. Re-lubricate with ‘MRO 1001–Elektrician’ if necessary. Highly flammable formulation. Do not spray on energised electrical equipment or circuits; de-activate before product application and extinguish all flames, pilot  lights and heaters. During use, flammable vapours may accumulate, especially in closed equipment. Use with adequate ventilation and maintain ventilation until vapours are gone. Allow to dry thoroughly before reactivating systems.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.