SAFETY SOL – MRO 1003

For heavy duty cleaning / degreasing applications of all  motors, terminals, circuit breakers, plugs, sockets, transformers, switchgears, tuners, busbars, electrical, electromechanical and mechanical equipment as brakes, chains,  gears, bearings, clutches, generators, hand tools, moulds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools.

1. Fast penetrating & cleans equipment fast.
2. Non abrasive & non flammable.
3. Non staining and non corrosive.
4. Evaporates leaving no residue.
5. Low surface tension and controlled evaporation of cleaner provides effective cleaning.
6. Lowers electrical resistance at contact points.
7. Prevents intermittent failure of equipment, arcing, tracking, short circuits and corona discharges and improves their reliability and performance.
8. High powered cleaning action.
9. Non staining & safe on all metals.
10. Contains safe, non flammable CO2 propellant.
11. 360° valve enables product to be sprayed in any position – even upside down.

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Spray liberally on the surface to be cleaned till the cleaning agent runs off as clear. Use extension tube for hard to reach areas. Use an abrasive or brush to clean heavy oxides or other deposits. Spray starting at the top and finishing at the bottom.

Not for use on plastic surfaces. May harm certain plastics, elastomers and air-dry painted surfaces. Test on plastics by using on a small area before use.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.