ASSEMBLY GEL – MRO 7000

Press-fit production of all types of machine elements, as a running-in lubricant for new machines and gear-boxes.

Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting.

Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.

As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.

As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.

1. Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
2. Low coefficient of friction
3. High pressure withstanding capacity
4. Load bearing capacity exceeds the yield point of most metals
5. Offers protection from wear and friction
6. Eliminates metal-to-metal contact
7. Prevents seizure, scoring, galling, fretting corrosion and stick slip
8. Makes disassembly easier and non-destructive irrespective of operational period or conditions
9. Economical to use owing to its high surface coverage capacity
10. Aids running in and provides emergency lubrication during start ups
11. Prevents cold welding and stick slip

1 Kg container

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

60 months from date of manufacture in sealed condition

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.