ELECTRIK MOTOR GEL – MRO 7006

2,249.00

Avaiability: In Stock
SKU: MRO 7006

High performance extreme pressure non melt grease for high temperature lubrication.

  • Wide service temperature range of -30°C to +180°C ( for short intervals up to +200° C)
  • Very good adhesion to metal surfaces
  • Non melting and does not drip off to contaminate other components
  • Highly resistant to water and water washout, humidity, steam, ageing and oxidation
  • Retains consistency at high temperatures
  • Low evaporation rate
  • Heavy duty performance increases relubrication intervals and cuts down lubricant consumption
  • Reduces wear and friction and provides emergency running in properties
  • Good high temperature performance
  • High surface pressure withstanding capacity
  • Increases service life of equipment
  • Prevents premature equipment failure by providing a solid lubricant film in case of lubricant starvation

Grease

High performance extreme pressure non melt grease for high temperature lubrication.

Applications

For Electrical Motor Bearing & Fan Bearings.

For lubrication of anti friction and journal bearings under very severe operating conditions of wear, friction, heat, humidity, loads and high stress.

Non-drip, non-melt bearing grease for high temperature lubrication of over head conveyor bearings in lithography, paint stoving ovens, curing booths, automotive assembly lines, ceramic, rubber, latex processing, pharmaceutical, bakery, vulcanizing, textile and glass plants.

For lubrication of plain and anti friction bearings of heavy engineering equipment, processing machines, textile machinery, pumps, mining and construction equipment, EOT cranes, material handling equipment.

Steel Mill & Foundries: Bearings in soot blowers, furnace door hinges, hot running bearings in axle boxes and kiln cars, furnace louver pins and bushings, pusher mechanisms, hot strip mills, bloom and billet mill roller bearings, crop car wheel and hot metal mixer bearings, open hearth furnaces, converters, ladles.

For lubrication of anti friction and plain bearings of pre-heater fans, electrical motors, induced draft fans, ovens, pumps, mixers, furnaces, paper mill machinery, sugar plants.

Benefits

  1. Wide service temperature range of -30°C to +180°C ( for short intervals up to +200° C)
  2. Very good adhesion to metal surfaces
  3. Non melting and does not drip off to contaminate other components
  4. Highly resistant to water and water washout, humidity, steam, ageing and oxidation
  5. Retains consistency at high temperatures
  6. Low evaporation rate
  7. Heavy duty performance increases relubrication intervals and cuts down lubricant consumption
  8. Reduces wear and friction and provides emergency running in properties
  9. Good high temperature performance
  10. High surface pressure withstanding capacity
  11. Increases service life of equipment
  12. Prevents premature equipment failure by providing a solid lubricant film in case of lubricant starvation

Available Packaging

1 Kg container

Caution

NA

Directions of Use

By normal greasing methods of filling greases i.e. by brush, grease guns or centralized lubricant dispensing systems. Pack bearing as per manufacturer’s instructions. Remove old grease or residues before using this grease. This non-soap based grease is not compatible with other greases or conventional lubricants and should not be mixed with any other oils or grease.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

36 months from date of manufacture in sealed condition

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Industries

Available Packaging

Packaging Type

Shelf Life

Type_

Color

Penetration Properties

Density

Drop point

Service temperature

Four ball test

,

Appearance

Base oil

Thickener

NLGI consistency

Oil separation

SKF-Emcor method

Water resistance

Downloads

Click to Download TDS: MRO 7006- Electrik Motor Gel

Click to Download MSDS: MSDS MRO 7006 – ELECTRIK MOTOR GEL

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.