NON-CHLORINATED KLEANER – MRO 2006

For heavy duty cleaning / degreasing applications of all motors, terminals, transformers, switchgears, tuners, busbars, relays, controls, printed circuit boards, electrical, electromechanical and mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, molds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools.

1. Removes grease, oil, dirt, dust, sludge, inks
2. Non-corrosive & non-staining
3. Removes tar, adhesives, and other tough contaminants
4. Leaves no residue
5. High dielectric strength
6. Safe on metals, plastics, and similar electrical insulation materials
7. High flash point reduces the potential risk of fire
8. Non-chlorinated, low-odor formulation
9. Fast penetrating and superior wetting action

5 L container

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment.

Use as supplied. Never dilute or mix with other products. Never use on energized equipment. Do not dilute with any other cleaning agent, water or mix with any solvent. Apply onto the soiled surface and continue dipping/applying/spraying liberally until only the solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Allow solvents to dry off the components before reactivating.

To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying.

Use only when completely dry.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

 24 months from date of manufacture in sealed condition

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. The user is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data is offered without warranty.