BATTERY TERMINAL KLEANER – MRO 1021

Cleaning of corrosion deposits & acid neutralization on:

Battery terminals

Cable connectors

Battery brackets

Battery casings

1. Cleans battery terminals and connectors quickly to
2. remove corrosion
3. Heavy duty foaming formula turns from yellow to pink in contact with acids
4. Indicates battery acid leak and neutralizes dangerous
5. acid leakage
6. Water soluble, non flammable formula rinses off with water
7. Helps maintain maximum battery current flow and
8. increases output
9. Reduces voltage leakage
10. Extends reliability, life and performance of batteries

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Do not use on energized equipment. Disconnect earth cable prior to application. Shake can well before spraying liberally over soiled / contaminated battery surface. Do not spray into battery cells and ensure that the covers are sealed tight. This product discharges as yellowish foam. In the presence of acid, the foam turns to pink colour. Allow few minutes for the product to soak. Use wire brush to remove heavy deposits on terminals and connectors. Flush with water and wipe dry with cloth or paper. Reapply till only yellowish foam remains indicating that battery acid and electrolytes have been neutralized. For further protection, spray the clean terminals with ‘MRO 1022 – Battery Terminal Kote’

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture.

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.