SILICON COMPOUND – MRO 7009

4,148.00

Avaiability: In Stock
SKU: MRO 7009

It’s a Stiff, non-melting silicone grease like compound for use as lubricant for rubber and plastic O-rings & sealant for gaskets and seals.

  • Wide service temperature range from -40°C to + 200°C
  • Very good oxidation resistance
  • Completely resistant to water, steam, humidity and corrosives
  • Low vapor pressure and low volatility
  • Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
  • Prevents age hardening, stress cracking and maintains resilience of plastics
  • Non gumming, non melting and non toxic
  • Provides good lubricating and sealing properties for rubbers and plastics
  • Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions

Lubricant cum Sealant

It’s a Stiff, non-melting silicone grease like compound for use as lubricant for rubber and plastic O-rings & sealant for gaskets and seals.

Applications

Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability

Lubrication of pneumatic control valves, fire extinguishers and water softener valves

Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems

Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks

Sealant for vacuum and pressure systems

Sealant between synthetic rubber or plastic parts to prevent them from sticking in vacuum or pressure systems

Chemical barrier and resistant coating for chemical processing equipment

Damping media for dash pots in electrical and electronic equipment

Assembly agent for holding rubbers and other parts due to its highly tacky nature

All ingredients comply with regulations for food grade materials

Benefits

  1. Wide service temperature range from -40°C to + 200°C
  2. Very good oxidation resistance
  3. Completely resistant to water, steam, humidity and corrosives
  4. Low vapor pressure and low volatility
  5. Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
  6. Prevents age hardening, stress cracking and maintains resilience of plastics
  7. Non gumming, non melting and non toxic
  8. Provides good lubricating and sealing properties for rubbers and plastics
  9. Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions.

Available Packaging

1 Kg container

Caution

NA

Directions of Use

Use as supplied. Never dilute or mix with other oil or grease. Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying.

Handling

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

General

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Shelf Life

36 months from date of manufacture in sealed condition

Disposal

All used and unused product should be disposed of in accordance with state regulations.

Limited Warranty

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Additional information

Brand

Application

, , , , , , , , , , , , , , ,

Industries

, ,

Available Packaging

Packaging Type

Shelf Life

Type_

Penetration Properties

,

Density

Drop point

Service temperature

Appearance

Base oil

Thickener

NLGI consistency

Oil separation

Water resistance

Bleed

Evaporation loss

Downloads

Click to Download TDS:  MRO 7009- Silicon Compound

Click to Download MSDS:  MSDS MRO 7009 – SILICON COMPOUND

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.