PENOIL – MRO 1010

Battery cables
Bearings
Chains
Conveyors
Corroded fasteners
Equipment disassembly
Hinges
Nuts & bolts
Pipes & fittings
Pulleys
Pumps
Screws
Valves

1. ‘MRO 1010 – PENOIL’ contains no acid and is effective against salt water corrosion & is formulated with low surface tension for fast penetrating action
2. Makes disassembly of parts possible with savings in time and material especially where maintenance shutdowns are limited & of a short duration.

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Test small area first to assure compatibility. Hold can 6 to 10 inches from surface, spraying liberally and uniformly. Use extension tube for hard-to-reach areas and pinpoint accuracy. For best results, use at room temperature.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.