ANTISIEZE COMPOUND – MRO 1019

Stud assemblies

Flange

Bolts 

Cylinder heads

High temperature connections

Manhole lugs

Do not use on electrical equipment or machinery while in operation.

1. This product eliminates galling, corrosion and overall seizure.
2. Stops galvanic pitting.
3. Protects under conditions of extreme heat exposure and pressure.
4. Virtually unlimited applications under extreme conditions

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

First clean and degrease the surface which will be coated with MRO 1019 – Antisieze Compound. Phosphatization or sandblasting (180 grit) increases the adhesion and service life.

Stir MRO 1019 – Antisieze Compound thoroughly before applying by spraying. Recommended dry film thickness: 5 to 20µm.

Following parts must be covered:

Under the head of the bolt

The plain part of the bolt

The thread

The face and both sides of the nut

All parts of the washer (if one is used)

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture.

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.