WIRE ROPE LUBE – MRO 1025

Wire rope

Exposed gears

Winches

Roller chains

Elevator cables

Conveyor rolls

Draglines

Anywhere that lubrication and superior mastic properties are desired.

Do not use on electrical equipment or machinery while in operation.

1. This product reduces wear and noise, waterproofs, and penetrates deep into metal pores for complete lubrication.
2. Protects against rust and corrosion in both indoor and outdoor environments.
3. This lubricant withstands extreme temperatures and pressure.
4. Will not become brittle or break down under prolonged use. Does not weather or wash away.
5. The improved fatigue life of wire ropes can be achieved
6. Ease of application as the lubricating oil has better flow and penetration properties than a grease

500 ml Aerosol Can

Contains flammable solvents. Do not spray near a naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with MRO 1011- Kleaner Degreezer universal cleaner.

Spray on evenly ‘MRO 1025 – WIRE ROPE LUBE’. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Assess the lubrication frequency and quantity on basis of service conditions, and avoid excessive lubrication.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. The safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety and short and long-term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture.

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data is offered without warranty.