ANTI SPATTER – MRO 1014

For prevention of spatter formation on:

Resistance welding tips

Mig and Tig tips

Weldments

Electrode holders

Contact tips, tools, metal moulds

Bench top splash guards

1. Eliminates the need for chiseling, grinding or brushing after welding
2. Paint Compatible
3. Prevents burning of welding spatters on contact tips & work pieces
4. Provides long lasting anti adherent effect
5. Improves surface finish
6. Extends nozzle life
7. Does not contain Silicone

500 ml Aerosol Can

Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation

Spray evenly thin light coats onto the surface. Also spray into the welding nozzle before starting operations and reapply as required. Wipe off the spatter with a light cloth or by slightly tapping the nozzle.

Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding PPE, safe use, and physical & health hazards. Safety data sheet is available from MRO INFRA or your local MRO INFRA Channel Partner.

Use in well ventilated areas. Avoid continuous breathing of vapour and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

24 months from date of manufacture

All used and unused product should be disposed of in accordance with state regulations.

The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended MRO INFRA product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.